Products designed and developed
in the United Kingdom
Hexagon Shelf Installation Guide
Tools you'll need
What's included
Safety First
- Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Please follow the provided instructions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or damages before assembly, and contact us if you notice any issues.
- Please do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
- Take care when installing to ensure that the shelves are mounted at suitable and safe heights, in particular with regard to children or pets.
- Do not sit or stand on the product.
- Use a pipe or cable detector to check that the area is free from pipes or electric cables. To aid installation, you could also use a stud detector to indicate where the vertical beams (studs) and horizontal beams (noggins) are.
- This product is not intended to support heavy objects. Avoid placing excessive weight to prevent damage and instability. MAX 5 Kg per shelf (distributed weight).
Instructions
Step 1. Please read the Safety Guidelines stated above before you start assembling the product. To allow you to work comfortably, ensure ample space around the area you intend to hang the shelf.
Step 2. Decide where you want to hang the hexagonal shelves on the wall. Use a measuring tape or ruler to mark the desired height and spacing between the shelves. Use a pencil to make small marks on the wall to indicate the placement on each shelf.
Step 3. If there are no studs in the desired locations, you will need to use wall anchors to provide additional support. We have included standard fittings for this shelf, but the customer must always assess and use the most appropriate fittings for their specific wall type.
Step 4. Drill holes into the marked spots on the wall where the shelves will be mounted. Insert the wall anchors into the holes, making sure they are flush with the wall surface.
Step 5. Insert the shelf fastener screw into the wall anchor and tighten it with a screwdriver. Leave the screw protruding approximately 5mm from the wall surface.
Step 6. Position the hex shelf and test if the back surface is in full contact with the fastener and the wall surface.
Step 7. If needed, remove the shelf and loosen or tighten the screw until everything feels secure and snug. Use a level to ensure the shelf is straight.
Now, take a step back and admire your new purchase!